Panasonic TX-43MX800B, Operating Instructions Manual

Page: 4 / 21

English 4
Safety Precautions
To help avoid risk of electrical shock, fire, damage or
injury, please follow the warnings and cautions below:
Mains plug and lead
Warning
This TV is designed to operate on AC 220-240 V,
50/60 Hz.
Insert the mains plug fully into the mains socket.
To turn off the apparatus completely, you must pull
the mains plug out of the mains socket.
Consequently, the mains plug should be easily
accessible at all times.
Disconnect the mains plug when cleaning the TV.
Do not touch the mains plug with wet
hands.
Do not damage the mains lead.
• Do not place a heavy
object on the lead.
• Do not place the lead
near a high temperature
object.
• Do not pull on the
lead. Hold onto the
mains plug body when
disconnecting the plug.
• Do not move the TV with the lead plugged into a
mains socket.
• Do not twist the lead, bend it excessively or
stretch it.
• Do not use a damaged mains plug or mains
socket.
• Ensure the TV does not crush the mains lead.
If you detect anything unusual,
immediately remove the mains
plug.
● Mains plug types vary
between countries.
IMPORTANT:
THE MOULDED MAINS PLUG
FOR YOUR SAFETY, PLEASE READ THE
FOLLOWING TEXT CAREFULLY.
This TV is supplied with a moulded 3-pin mains plug for
your safety and convenience.
A 13 amp fuse is fitted in this mains plug. Shall the fuse
need to be replaced, please ensure that the
replacement fuse has a 13 amp rating and that it is
approved by ASTA or BSI to BS1362.
Check for the ASTA mark or the BSI mark on the
fuse body.
If the mains plug contains a removable fuse cover, you
must ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover, the mains plug must not be
used until a replacement cover is obtained.
A replacement fuse cover may be purchased from your
local dealer.
Do not cut off the mains plug.
Do not use any other type of mains lead except the one
supplied with this TV.
The supplied mains lead and moulded plug are designed
to be used with this TV to avoid interference and for your
safety.
If the mains socket in your home is not suitable, get it
changed by a qualified electrician.
If the plug or mains lead becomes damaged, purchase
a replacement from an authorised dealer.
How to replace the fuse:
For plug type shown in example 1
Lift out the removable fuse cover with a
screwdriver and replace the fuse, then
refit it securely into the mains plug.
For plug type shown in example 2
Lift open the fuse cover in the mains plug
with a screwdriver and replace the fuse,
then press the fuse cover down securely.
Example 1
Example 2