- 67 -
Postcode
:
Sets your postcode to receive local information in the GUIDE Plus+
system (only available in some countries).
System Information
:
Displays the system information of the GUIDE Plus+ system (only
available in some countries).
●
DVB-T and Analogue channels are displayed on the same TV Guide
screen.
D
and
A
may be displayed to distinguish DVB-T and Analogue
channels. There will be no programme listings for Analogue channels.
Timer Programming
This function allows you to select programmes that you want to be reminded
to watch or record to the USB HDD.
1. Select the forthcoming programme with / / / and press
OK
to
access.
2. Select
USB HDD Rec.
/
Reminder
with / and press
OK
to set.
●
To check / change / cancel a timer event
Recording > Timer Programming > Editing Timer Programming
●
LED will turn to orange in Standby mode if
Timer Programming
is set.
●
To return to
TV Guide
BACK/RETURN
●
If you select the current programme, a confirmation screen asking
whether you want to watch or record the programme appears. Select
Timer Programming
with / and press
OK
to set
USB HDD Rec.
to
record from the time you finish the timer event setting.
= Note =
●
Not valid in Analogue
●
Timer Programming
only works reliably if correct time information is
received via the signal from the broadcaster or service provider.
●
No other channels can be selected while the recording of
Timer
Programming
is in progress.
●
When recording programmes to the USB HDD, be sure to format the USB
HDD and enable it to record in
USB Device Setup
.
●
To set timer programming events of this TV on the network equipment
(smartphone, etc.) from outside the home network
Summary of Contents for TX-42ASE650
Page 238: ...Ver 1 01 ...
