36
Barcode Reader
To Correctly Read a Barcode with This Computer, Observe the Following
z
The reading angle is important factor.
Perform reading at the angle indicated in the figure. We recommend you
to set at approximately 2° to 3° angle from the perpendicular position.
z
Hold the reader farther away when reading a larger barcode, and closer in when reading a smaller barcode or a thinner
barcode.
z
Perform reading so that the entire symbol falls within the center of the red LED light.
z
The reader can still read a barcode even if the barcode is not in the center of the red LED light. However, if a part of the
barcode lies outside the LED light, the barcode cannot be read. Make sure the entire barcode is inside the LED light.
If the reading window is dirty, gently wipe the reading window with a cloth or a cotton swab moistened with water.
Do not allow materials that can easily scratch the reading window to touch the window, such as sandpaper or metal object.
For parts other than the reading window, please read “Handling and Maintenance” in the Operating Instructions.
Cleaning the Reading Window
2° to 3°
Right
Right
LED light
Right
Right
Right
Wrong
LED light
