Panasonic Toughbook CF-74JCL02AM Reference Manual Download Page 47

Page: 47 / 107

USB Devices

Preparation

Attach the device for the media containing the card driver (e.g., CD-ROM). Equipment connected to the multimedia
pocket cannot be recognized if connected after the USB device driver installation screen appears.

To connect the USB device

Open the cover and connect the USB device to one of the USB
ports (A or B) on the computer.

For further information, refer to the instruction manual of the USB device.

To remove the USB device

Disable the USB device.

Double-click

on the notification area and select the USB device, then click

[Stop].

Follow the on-screen instructions.
This step is not necessary when;

• Removing the device after turning off the computer.
•

is not displayed.

• The device does not appear in the list in step

Remove the USB device.

Connecting/Removing USB Devices

Summary of Contents for Toughbook CF-74JCL02AM












































































































Search results

Summary of Contents for Toughbook CF-74JCL02AM

Reviews:

Related manuals for Toughbook CF-74JCL02AM

Brands by name

Popular brands

Panasonic Toughbook CF-74JCL02AM, Reference Manual

Search results

Summary of Contents for Toughbook CF-74JCL02AM

Reviews:

Related manuals for Toughbook CF-74JCL02AM

Brands by name

Popular brands