93
Quick Boot Manager
Boot training
By using this function, Windows learns reading files on boot to shorten the boot time.
To start this function, perform the following procedure.
If [Enter Password] is displayed during the following procedure, input the Supervisor Password or the User Password of setup
Utility.
1
Connect the AC adaptor.
2
Start the Quick Boot Manager.
3
Click [Boot training].
4
Select the timing of performing boot training and the action after finishing boot training,
and click [OK].
5
Click [OK] on the message of the password.
NOTE
z
While performing the boot training, do not touch the keyboard, touch pad, external mice, etc.
To clear all settings
To clear all settings of Quick Boot Manager, perform the following procedure.
1
Start the Quick Boot Manager.
2
Click [Clear all settings].
3
At the confirmation message, click [Yes].
4
Click [OK].
5
Click [Finish].
If [Enter Password] is displayed, input the Supervisor Password or the User Password of Setup Utility.
