46
RAM Module
4
Insert/Remove the RAM module.
z
To insert
A
Align the cutout (C) with the projection, and tilt the module slightly
and insert it in the slot.
B
Press down the module so that the right and left hooks (D) are
locked.
z
To remove
A
Carefully open the right and left hooks (D).
The module will rise.
B
Carefully remove the module from the slot.
5
Set the cover and battery pack.
CAUTION
z
Set the cover and battery pack correctly so that they do not fall when you carry the computer.
NOTE
z
If it is hard to insert or to press down the RAM module, do not try forcibly but check the module’s direction.
z
Use the appropriate screw driver so as not to strip the thread of screw.
z
If the RAM module is recognized correctly, the total size of the RAM module memory is displayed on the [Information]
menu of the Setup Utility (
If the RAM module is not recognized, power off the computer and insert it again.
