background image

49

Fingerprint Reader

CAUTION

To protect the fingerprint sensor, be sure to close the cover when not using the fingerprint reader.
We shall not be liable for any loss or damage whatsoever resulting from your Fingerprint device or neglect of Fingerprint 
device use, or any data loss resulting from such developments as Fingerprint authentication device malfunctioning.

Fingerprint’s Outline

The conventional security systems use ID/passwords and token devices such as IC cards to authenticate users. Therefore 
the passwords and token devices are exposed to the risk of being lost, stolen and hacking.
The Fingerprint authentication method uses user’s fingerprints instead of passwords for security authentication. You can use 
your fingerprints to start up your computer and log on Windows.
We recommend you use the Fingerprint Reader in combination with the TPM (Trusted Platform Module) to increase the secu-
rity level of your computer.

To access the online manual

This manual describes Step 2, 3 and the initial part of Step 4.
For further steps, refer to the UPEK Protector Suite QL Help menu. 

Click 

 (Start) - [All Programs] - [Protector Suite QL] - [Help].

Overview

Recommended Installation Procedure

Performed by the Computer Administrator

Performed by each user

TPM Installation

 (

Installation Manual of TPM)

(If the TPM is not being used, skip this step.)

User Fingerprint Enrollment

User’s Data
• Windows Logon Password
• Fingerprint
• Fingerprint Backup Password
• Power-on Password

Step 2

Step 4

Fingerprint Utility Installation

Step 3

Step 1

TPM Fingerprint Utility Initialization

(If the TPM is not being used, skip this step.)

Summary of Contents for Toughbook CF-30CTQCXBM

















































































































Reviews: