55
LAN
Enabling/Disabling the Wake Up from wired LAN function
When the Wake Up from wired LAN function is enabled, the computer automatically resumes from sleep or hibernation when
the computer is accessed from the network server via the internal LAN port. (Default setting)
The Wake Up from wired LAN function can be switched to enable/disable by performing the following procedure.
1
Click (Start) - [Computer] - [System properties] - [Device Manager].
z
A standard user needs to enter an administrator password.
2
Double-click [Network adapters] - [Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Con-
troller].
3
Click [Power Management], add (to enable) or remove (to disable) check marks of [Allow
the computer to turn off this device to save power] and [Allow this device to wake the
computer], and then click [OK].
z
We recommend you to make the above two settings ON/OFF simultaneously.
NOTE
z
The computer may start up if accessed by another computer on the network.
The following procedure can be used to prevent startup due to unintentional access by a computer.
A
Click
(Start) - [Computer] - [System properties] - [Device Manager].
z
A standard user needs to enter an administrator password.
B
Double-click [Network adapters] - [Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller].
C
Click [Power Management], add a check mark for [Only allow management stations to wake the computer], and
then click [OK].