Panasonic Toughbook CF-18BCAGCMM, Supplementary Manual

Page: 12 / 28

12
More Advanced Security
You can increase your computer’s security level by setting the BIOS level
described in this section.
Performed by the Computer Administrator.
1
Register the Supervisor Password.
You have to register the Supervisor Password to proceed to the next step.
If you have already registered the Supervisor Password, you can skip this
step, and move on to step
2 .
If you have not done this, have enrolled your fi ngerprint using Protector Suite
QL, and have already made Power-on Security effective, after step
B
, your
fi ngerprint authentication will be necessary.
A
Turn on or restart the computer.
B
Press
F2
several times while [Panasonic] boot screen is displayed soon
after the computer starts the startup procedure.
C
Select the [Security] menu.
D
Select [Set Supervisor Password], and press
Enter
.
E
Enter your password in the [Enter New Password], and press
Enter
.
• The password will not be displayed on the screen.
• You can use up to 32 alphanumeric characters (including spaces).
• The case (upper/lower) is ignored.
• To input numbers for the password, use the numbered keys on the
keyboard.
• You cannot use
Shift
and
Ctrl
to input a password.
F
Enter your password again in [Con fi rm New Password], and press
Enter
.
G
In [Setup Notice], press
Enter
.
2
Set the High Security Level.
A
Select [Fingerprint Security Sub-Menu], and press
Enter
.
B
Select [Security mode:], and select [High].
• Default setting: Simple
C
Press
ESC
to close the sub-menu.
D
Press
F10
, select [Yes], and press
Enter
to exit the Setup Utility.
NOTE
In the “High” security mode, you have to enter the Supervisor or User
Password even after fi ngerprint authentication.
In the “Simple” security mode, you do not have to enter the Supervisor
or User password after fi ngerprint authentication.
00_FingerprintReader_UK.indd 12 00_FingerprintReader_UK.indd 12 30.01.2008 15:06:13 30.01.2008 15:06:13