26
1
Turn your computer on
2
Press the disc eject button and slowly pull out the tray
3
Place the disc securely on the center holder
4
Close the tray
Setting a Disc
Title-side up
Do not apply excessive force to the tray in the open position, doing so could
damage the tray.
Center Holder
Eject Button
CAUTION
CD Drive
If the vibration of the CD drive is excessive, set [CD Drive Speed] to [Low]
in the Setup Utility.
For AutoPlay CDs:
• If an AutoPlay CD does not start after the computer resumes from the
standby or hibernation mode, we recommend reinser ting the CD again
after a 15-second wait.
• An AutoPlay CD may start during the access of a file.
When playing back movies from a disc, note that smooth playback may
not be possible in some cases.
If the CD drive has not been accessed within 90 seconds, the drive motor will
automatically shut down to reduce the power consumption. When the CD drive
is accessed once again, the power of the drive motor is turned on. However,
approximately 30 seconds are required until data is actually read from the disc.
Power-saving Mode
NOTE