![background image](http://html.mh-extra.com/html/panasonic/touchbook-cf-50-series/touchbook-cf-50-series_manual_264520063.webp)
63
Has the floppy disk been correctly inserted?
Has the floppy disk been correctly formatted?
Has the Setup Utility been used to set [Floppy Operation] to [Enable]?
(
page 52
)
Your floppy disk content may be corrupted.
Is the floppy disk write-protected?
Windows 2000
Select [Format] in [My Computer] - [3 1/2 Floppy (A:)] - [File]. After confirming the
disk volume and format type, start formatting.
Windows XP
Select [Format] in [start] - [My Computer] - [3 1/2 Floppy (A:)] - [File]. After confirming
the disk volume and format type, start formatting.
Your drive or file may not have been properly set.
Check to see if the hard disk is full. If it is full, delete unnecessary files.
Your hard disk content may be corrupted. Contact Panasonic Technical Support.
Try testing another drive or media.
You may need to clean the lens or disc.
Is the disc loaded on the tray correctly?
Is the disc bent, scratched, or dirty?
Dealing with Problems
(Advanced)
Cannot read/write to a
floppy disk
U n a bl e t o w r i t e t o a
floppy disk
How to format a floppy
disk is unclear
Unable to read/write to
the hard disk
When the previous item
is not the cause
Trouble has occurred
with the disc
The access lamp (
)
does not light
Cannot play disc or read
data from it
Disk Operations
Cannot tell whether the
RAM module has been
correctly installed
The RAM module has not
been recognized
The address map for IRQ,
I/O port address, etc. is
unclear
A USB device does not
work
Windows XP
Insufficient perf o r-
mance when forward-
ing data via a PC card
(e .g., unstable video
images when writing
videos to a DV camera
using an IEEE1394 PC
card)
You can check whether the RAM module is recognized using [Information] menu in
the Setup Utility. If the RAM module is not recognized, turn the computer off and
reinsert the RAM module.
Make sure the RAM module has been properly inserted.
Use the RAM module that supports the recommended specifications.
Windows 2000
Check the address map by going to [View] - [Resources by type] in [Control Panel] -
[System] - [Hardware] - [Device Manager].
Windows XP
Check the address map by going to [View] - [Resources by type] in [Control Panel] -
[Performance and Maintenance] - [System] - [Hardware] - [Device Manager].
Make sure a driver is installed.
Contact the manufacturer of the product.
When is displayed in the Device Manager, try removing and inserting the device
once more. If the problem persists, restart the computer.
Execute the following operations after logging on with administrator authority.
1
Input [c:\util\cpupower\setup.exe] in [star t] - [Run], and select [OK].
Follow the on-screen instructions.
2
Select [Performance] in [start] - [All Programs] - [Panasonic] - [CPU Idle Setting]
and select [OK], then select [Yes].
The computer will be restarted automatically.
These operations will be helpful in alleviating the loss of data forwarding perfor-
mance that results from CPU power saving functions, but will not be effective against
performance losses resulting from other causes.
These operations will reduce the battery operating time somewhat, so if no error
occurs, we recommend that you return the computer’s settings to [Battery (Win-
dows XP Standard)] in [CPU Idle Setting].
Connecting Peripherals (continued)