34
RAM module specifications
3
Inserting the RAM module
1
Slide in the module at an angle and firmly attach it to the connector.
2
Snap the module into place by pushing down on it.
Removing the RAM module
1
Open the left and right hooks.
2
Gently remove the RAM module from the slot.
4
Put the cover back into place
1
Insert the cover diagonally, then fit it in place.
2
Fasten the screw.
RAM modules are extremely sensitive to static electricity. There are cases
where static electricity generated by the human body has adversely affected
such modules. When inserting or removing a RAM module, do not touch the
terminals or internal components, insert objects other than the module, or al-
low foreign particles to enter. Doing so has been known to cause damage, fire
or electric shock.
200 pins, SO-DIMM, DDR-SDRAM, PC2100 Compliant
RAM Module
1
Power off your computer
(
"Starting Up/Shutting Down")
Do not shut down using the standby or hibernation function.
Disconnect the AC adaptor, turn the computer over and remove the battery
pack.
2
Remove the memory cover after removing the screw holding
it in place
Memory Cover
RAM Module Slot
RAM Module
CAUTION
Only a RAM module designed for PC2100 can be added.
NOTE
Whether the RAM module is properly recognized or not can be confirmed
in [Information] of the Setup Utility (
page 50
). If the RAM module is
not recognized, power off the computer and insert it again.
Screw
Use a RAM module meeting the RAM module specifications below. If a module is
used that does not meet the specifications, there are cases in which data may
become unusable or the computer may not operate properly.
Inserting/Removing RAM Module
If the RAM module is difficult to insert or difficult to press down, do not force
it. Check once more to ensure that the module is positioned correctly.
CAUTION
Hooks