Panasonic TH-85PF12W Operating Instructions Manual Download Page 59

Page: 59 / 72

Weekly Command Timer

10:30

Command No

Time

IMS:SL1

Command

Program

Weekly Command Timer

Command

Command No

IMS:SL1

10:30

Time

Program

1/2

SIGNAL

OFF

STANDBY SAVE

OFF

POWER MANAGEMENT

OFF

AUTO POWER OFF

OFF

OSD LANGUAGE

ENGLISH (US)

COMPONENT/RGB-IN SELECT

RGB

INPUT LABEL
POWER SAVE

SET UP

SCREENSAVER

EXTENDED LIFE SETTINGS

This function allows you to reset the unit to the factory setting.

Shipping condition

Press to display the SET UP menu.

Press to select “OSD LANGUAGE”.

Press for more than 3 seconds.

Press to select “Shipping”.

Press to display the Shipping menu.

Press to select “YES”.

Press to confi rm.

[from the unit]

Press the MENU button till the SET UP menu is displayed.

Press the Volume Up “+” or Down “–” button to select “OSD LANGUAGE”.

Press and hold the ENTER button till the Shipping menu is displayed.

Press the Volume Up “+” or Down “–” button to select “YES”.

Press the ENTER button and wait for 10 sec.

Options Adjustments

Press to select Command No.

Press to select a command number.

Press to select Time / Command.

Press to set each item.
Time: Set the time to execute a command program.
Pressing “

” or “

” button once changes “Time” 1

minute.

Pressing “

” or “

” button continuously changes “Time” by 15 minutes.

Command: Select a command to execute at the set time. This unit has 64 commands to set.

(see page 64)

Notes:

• Command is performed in order of execution time, regardless of the command number.
• If a command execution time overlaps with that of other commands, these commands are

performed in number order.

• Pressing

, Time becomes --:-- and Command becomes ---.

Note:

Press

to return to the previous screen.

Command setting screen

Options

Shipping

YES

Summary of Contents for TH-85PF12W









































































Search results

Summary of Contents for TH-85PF12W

Reviews:

Related manuals for TH-85PF12W

Brands by name

Popular brands

Panasonic TH-85PF12W, Operating Instructions Manual

Search results

Summary of Contents for TH-85PF12W

Reviews:

Related manuals for TH-85PF12W

Brands by name

Popular brands