manualshive.com logo in svg

Panasonic TH-84LQ70LU, Operating Instructions Manual

Share
Download
Panasonic TH-84LQ70LU Operating Instructions Manual Download Page 63

63

English

  Power on message(Power 
management)

 Whether to show/hide an information message that tells 
the power has been turned off by Power Management 
when the power is set to [On].

 [On]:

 The information is shown at the time of power 
[On].

 [Off]:

 The information is not shown at the time of 
power [On].

 Note

● 

 This setting is enabled only when “Power 
management” function is [On] (see page 47).

 Initialization

 When both main unit buttons and remote control buttons 
are disabled due to the [Button lock], [Controller user 
level] and [Controller ID function] settings, set all the 
values [Off] so that all the buttons are enabled again.

 Press <VOL - (Unit)> together with 
<RETURN> and hold for more than 5 
seconds.

 [Shipping] is displayed and the lock is released when 
it disappears.

 

 Shipping

● 

 Settings for [Button lock], [Controller user level] 
and [Controller ID function] will be back to [Off].

Summary of Contents for TH-84LQ70LU






















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands