manualshive.com logo in svg

Panasonic TH-84LQ70LU, Operating Instructions Manual

Share
Download
Panasonic TH-84LQ70LU Operating Instructions Manual Download Page 14

English

14

  Connections

  AC cord connection and fixing

 Back of the unit

 

 AC cord fixing

 

 AC cord (supplied)

 Plug the connector into the display unit.

 Plug the AC cord until it clicks.

 Note

● 

 Make sure that the AC cord is locked on both the 
left and right sides.

 Unplug the AC cord

 

 Unplug the connector pressing the two knobs.

 Note

● 

 When disconnecting the AC cord, be absolutely 
sure to disconnect the AC cord plug at the socket 
outlet first.

 

  Cable fixing

 Note

● 

 One clamper is supplied with this unit. In case of 
securing cables at five positions, please purchase it 
separately.
 If you need more clampers, purchase them from your 
dealer. (Available from the customer service)

 

84-inch model

 

 

98-inch model

 

 

 Keep pushing both 
side snaps

 hole

 1. Attach the clamper

 Insert the clamper in a 
hole.

 To remove from the 
unit:

 snaps

 

 Keep pushing the 
knob

 hooks

 2. Bundle the cables

 Set the tip in the hooks

 To loosen:

 knob

Summary of Contents for TH-84LQ70LU






















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands