manualshive.com logo in svg

Panasonic TH-75EQ1W, Operating Instructions Manual, Page: 90 / 129

Share
Download
Panasonic TH-75EQ1W Operating Instructions Manual Download Page 90

90

English

Password change (user rights)

A user can change password only.

1

2

3

4

Current password input field
New password input field
New password input field (re-enter for confirmation)
Button for executing password change

Note

● 

Alphanumeric characters can be used for a user 

name.

● 

Up to 16 characters can be used for a user name and 

a password.

● 

When changing the administrator account, both 

“current user name” and “current password” are 

required.

● 

See below when you log in with administrator 

privileges and change the account.

 •

It is recommended not to use the current user 

name/password or default values for a new user 

name/password.

● 

See below when you log in with user privileges and 

change the password.

 •

It is recommended not to use the current password 

or default value for a new password.

● 

It is recommended to use a password different from 

passwords of PC and other devices.

● 

The following are recommendations in complexity 

when changing passwords. (For both administrator 

privileges and user privileges)
Include at least 3 kinds of characters from the 

following 4, and the number of characters should be 

8 or more.

 •

Alphabet upper case character (A to Z)

 •

Alphabet lower case character (a to z)

 •

Number (0 to 9)

 •

Special character  

(~ ! @ # $ % ^ & * ( ) _ + | } { [ ] < > . , / ? ', etc.)

It is recommended to set the password using the 

above types of characters without leaving the 

password field blank.

 

 

■

Crestron Connected  

(Crestron Connected operation screen)

You can monitor or control the Display using “Crestron 

Connected”.
If Adobe Flash Player is not installed in your computer, 

or if the browser does not support Flash, this page does 

not appear. In this case, return to the previous page by 

clicking [Back] in the operation page.

● 

Operation page

[Tools], [Info], [Help]

Switches the pages for tools, information, help using 

the tab.

[POWER]

Switches between on and off of the power.

[

VOL DOWN

], [

AV MUTE

], [

VOL UP

]

Sets the volume, AV mute.
When the power of the Display is turned off, these 

operations are not available.

[Input Select]

Sets the input selection.
When the power of the Display is turned off, this 

operation is not available.

Operation buttons on the menu screen

Operates on the menu screen.

Image quality adjustments

Operate items related to image quality.

[Back]

Returns to the previous page.

Summary of Contents for TH-75EQ1W


































































































































Reviews:

No comments