Panasonic TH-75EQ1W Operating Instructions Manual Download Page 57

Page: 57 / 129

English

■

[Wobbling]

Automatically shifts the display image to prevent image

retention on the liquid crystal panel.
Setting this to [On] moves the screen position at certain

intervals and displays the images.

Note

●

If [Multi display setting] is set to [On], this function

does not operate. (see page 62)

●

When this function is operating, part of the screen

may appear to be missing.

Input label

This function can change the label of the Input signal to

be displayed.
[Input label] - submenu screen

HDMI1

HDMI2
DVI-D
PC

VIDEO

DVI-D

HDMI2

HDMI1

VIDEO

Input label

[HDMI1]

[HDMI1] / [DVD1] / [DVD2] /

[DVD3] / [Blu-ray1] / [Blu-ray2] /

[Blu-ray3] / [CATV] / [VCR] /

[STB] / (Skip)

[HDMI2]

[HDMI2] / [DVD1] / [DVD2] /

[DVD3] / [Blu-ray1] / [Blu-ray2] /

[Blu-ray3] / [CATV] / [VCR] /

[STB] / (Skip)

[

DVI-D

]

[DVI-D] / [DVD1] / [DVD2] /

[DVD3] / [Blu-ray1] / [Blu-ray2] /

[Blu-ray3] / [CATV] / [VCR] /

[STB] / (Skip)

[PC]

[PC] / [DVD1] / [DVD2] /

[DVD3] / [Blu-ray1] / [Blu-ray2] /

[Blu-ray3] / [CATV] / [VCR] /

[STB] / (Skip)

[

VIDEO

]

[VIDEO] / [DVD1] / [DVD2] /

[DVD3] / [Blu-ray1] / [Blu-ray2] /

[Blu-ray3] / [CATV] / [VCR] /

[STB] / (Skip)

(Skip): When <INPUT> is pressed, the input will be

skipped.

: [PC] may be displayed as [PC[YP

]] depending on

the settings of [PC input mode]. (see page 75)

Power management settings

Set each item to reduce power consumption.
This function works only for the input terminal that is

currently selected.
[Power management settings] - submenu screen

Power management settings

Power management mode

No signal power off
HDMI1 power management

PC power management

DVI-D power management

Power save

Custom

Off

Disable

Off

HDMI2 power management

Off

Extended standby mode

Off

Input detection
Changing delay

Off

■

[Power management mode]: [On]

The following fixed values are set to the menu of

power consumption reduction. Individual setting is not

available.

[No signal power off]:

[Enable]

[HDMI1 power management]:

[On]

[HDMI2 power management]:

[On]

[

DVI-D power management

[On]

[PC power management]:

[On]

[Power save]:

[On]

■

[Power management mode]: [Custom]

The menu of the power consumption reduction is

individually set. This setting is enabled when [Power

management mode] is set to [Custom].

■

[Power management mode]: [Input

detection]

Sets the power consumption reduction menu

individually.
This is enabled when [Power management mode]

is set to [Input detection]. This mode interlocks

between the power management operation and the

input detection function for operation. When this

mode detects the change from without-signal state to

with-signal state by monitoring input signals, the input

signal detection function operates, and an input is

automatically switched to the input. Also, if the current

input signal disappears, it is automatically switched

to another input. If all the input signals disappear,

the power management function operates, and

automatically turns the power off/on. This operation is

performed between selected terminals.

Note

●

Set the “Power management” function to [On] for

terminals to operate this function.

●

[Extended standby mode] is set to [On], and greyed

out.

Summary of Contents for TH-75EQ1W


































































































































Search results

Summary of Contents for TH-75EQ1W

Reviews:

Panasonic TH-75EQ1W, Operating Instructions Manual, Page: 57 / 129

Search results

Summary of Contents for TH-75EQ1W

Reviews: