manualshive.com logo in svg

Panasonic TH-75EQ1W, Operating Instructions Manual, Page: 67 / 129

Share
Download
Panasonic TH-75EQ1W Operating Instructions Manual Download Page 67

67

English

Note

● 

To use a DHCP server, make sure the DHCP 

server is started.

● 

Contact your network administrator for details on 

[IP address], [Subnet mask] and [Gateway].

● 

Shipping condition
[DHCP]: Off
[IP address]: 192.168.0.8
[Subnet mask]: 255.255.255.0
[Gateway]: 192.168.0.1

[Command port]

Set the port number used for command control.

Select [Command port] and press <ENTER> to set 

the number.

● 

The available setting range is 1024 ‒ 65535.

● 

Entering numbers (see page 66)

Note

● 

When the PJLink protocol is used, the port setting is 

not necessary.

[MAC address]

Displays the MAC address of this unit.

 

■

[Network status]

Checks the current Network settings status.

192. 168.   0.   1

255. 255. 255.   0

192. 168.   0.   8

12:34:56:78:9A:BC

Network status

DHCP
IP address
Subnet mask
Gateway
MAC address

Off

 

■

[AMX D. D.]

Set whether to allow the Display to be detected by AMX 

Device Discovery.

[On]:

Enables detection by AMX Device Discovery.

[Off]:

Disables detection by AMX Device Discovery.

● 

For more details, visit the following web site.
http://www.amx.com/

 

■

[Crestron Connected]

When this function is set to [On], the Display can be 

monitored or controlled via the network using equipment 

and application software of Crestron Electronics, Inc.
This Display supports the following application software 

from Crestron Electronics, Inc.

 •

RoomView Express

 •

Crestron Fusion

Crestron Connected is a function to connect to a system 

developed by Crestron Electronics, Inc. which manages 

and controls multiple system devices connected to the 

network.

● 

For details of Crestron Connected, refer to the 

Crestron Electronics, Inc. web site (Provided only in 

English).
http://www.crestron.com/
For the download of “RoomView Express”, refer to 

the Crestron Electronics, Inc. web site (Provided only 

in English).
(https://www.crestron.com/en-US/resources/get-

roomview)

 

■

[USB memory network settings]

Sets whether to permit the network setting using the 

USB memory device. (see page 115)

[Permit]:

Permits USB memory network settings.

[Prohibit]:

Prohibits USB memory network settings.

Note

● 

This function is set to [Permit] as factory default.

● 

Once the network setting is done with USB memory 

device, this function is set to [Prohibit].

 

■

[LAN control protocol]

Select the LAN control protocol.

[Protocol 1]:

Control with the Panasonic Display sequence.

[Protocol 2]:

Control with the sequence that is compatible with 

Panasonic Projector.

Note

● 

For PJLink and WEB browser control, the operation is 

possible regardless of the setting.

● 

When operating the “Multi Monitoring & Control 

Software”, select [Protocol 2].

 

■

[Reset]

You can reset the network setting to the factory default 

of the Display.
Select [Yes] with     and press <ENTER>.

Network settings

Reset

Yes

No

Note

● 

The settings for [NTP synchronization], NTP server 

and [Time zone] will be reset to the factory default.

Summary of Contents for TH-75EQ1W


































































































































Reviews:

No comments