manualshive.com logo in svg

Panasonic TH-75EQ1W, Operating Instructions Manual, Page: 49 / 129

Share
Download
Panasonic TH-75EQ1W Operating Instructions Manual Download Page 49

49

English

When VIDEO is selected

59.94    Hz
  --         MHz
NTSC

15.73    kHz

0

Signal

3D Y/C filter

Colour system

MPEG noise reduction

Cinema reality

Input level

Noise reduction

H-freq.

Off

Auto

Off

Off

Auto

V-freq.

Dot clock freq.

Signal format

Dynamic backlight control

Off

Frame creation

Off

When USB / MEMORY VIEWER is selected

Signal

Noise reduction

MPEG noise reduction

Auto

Off

Frame creation

Off

Note

● 

[Signal] setup menu displays a different setting 

condition for each input signal.

● 

Menu that cannot be adjusted is greyed out.

● 

[Frame creation] is a function for 86/75-inch models. 

This function is not available for 65/55/50/43-inch 

models.

 

■

[

YUV/RGB-in select

]

This menu is displayed at HDMI 1, HDMI 2 and DVI-D 

IN inputs.
Select to match the signals from the source 

connected to each terminal.

[

YUV

]

YUV signals

[RGB]

RGB signals

Note

● 

Set for each input terminal (HDMI 1, HDMI 2, 

DVI-D IN).

 

■

[Cinema reality]

Faithfully reproduces videos shot with cinema films. 

Set this to [Off] normally.

Note

● 

In [ENGLISH(US)] OSD language, [Cinema reality] 

is displayed as [3:2 PULLDOWN].

● 

If [Cinema reality] is set to [On], videos including 

movies shot at 24 frames per second are 

reproduced more naturally.

● 

If the video is unnatural with [On] set, set it to [Off].

 

■

[Noise reduction]

Reduces picture noise.

[Off]:

Disables [Noise reduction].

[Min], [Mid], [Max]:

Sets strength of [Noise reduction].

[Auto]:

[Noise reduction] will be automatically selected 

from [Min], [Mid] or [Max].

 

■

[MPEG noise reduction]

Reduces block noise and mosquito noise on MPEG 

videos.

[Off]:

Disables [MPEG noise reduction].

[Min], [Mid], [Max]:

Sets strength of [MPEG noise reduction].

 

■

[XGA mode]

This menu is displayed with PC IN input and when 

[PC input mode] is set to [PC].
This unit supports XGA signals (1024 x 768, 1280 x 

768, 1366 x 768) having different aspect ratios and 

sampling rates.

[Auto]:

Automatically detects the signal.

Switch the setting to suit the input signal for better 

display depends on the angle of view or display 

resolution condition. 

Note

● 

After making this setting, be sure to make each 

adjustment (such as [Auto setup]) on the [Position] 

menu as necessary. (see page 39)

 

■

[Signal range]

This menu is displayed at HDMI1, HDMI2 and DVI-D 

IN inputs. Switches the dynamic range to match the 

signals from the source connected to each terminal.

[

Video(16-235)

]:

If the input signal is the video range

Example: HDMI terminal output for DVD player

[Full(0-255)]:

If the input signal is full range

Example: HDMI terminal output for personal 

computer

[Auto]:

Switches the dynamic range automatically between 

[Video(16-235)] and [Full(0-255)] according to the 

input signal.

Note

● 

[Auto] can be selected when HDMI signal is input.

Summary of Contents for TH-75EQ1W


































































































































Reviews:

No comments