BLACK EXTENSION
GAMMA
INPUT LEVEL
ADVANCED SETTINGS
NORMAL
NORMALIZE
W/B LOW B
W/B HIGH R
W/B LOW R
W/B LOW G
W/B HIGH G
W/B HIGH B
0
0
2.2
0
0
0
0
0
0
25
0
0
0
5
PICTURE
NORMAL
NORMALIZE
STANDARD
BRIGHTNESS
SHARPNESS
PICTURE MENU
COLOR
PICTURE
TINT
ADVANCED SETTINGS
COLOR TEMP
NORMAL
29
PICTURE Adjustments
1
ADVANCED SETTINGS
Enables ne picture adjustment at a professional
level (see next page).
Press to enter Advanced
Settings.
While the “PICTURE” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION
( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.
Helpful Hint ( /
NORMALIZE
Normalization)
Press to display the PICTURE menu.
Press to select the menu to adjust.
Select the desired level by looking at the picture behind the menu.
Select to adjust each item.
Note:
Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input
and menu setting.
2
Press the left or right button to switch between modes.
MONITOR
STANDARD
CINEMA
DYNAMIC
STANDARD
For viewing in standard (evening lighting) environments.
This menu selects the normal levels of BRIGHTNESS
and PICTURE.
DYNAMIC
For viewing in brighter environments.
This menu selects higher than normal levels of
BRIGHTNESS and PICTURE.
CINEMA
For use in viewing tone-focused pictures with
brightness reduced.
MONITOR
For use when creating broadcast or movie content. With
this picture, even if the overall average picture level (APL)
changes, the brightness of areas with the same signal
level does not change.
PICTURE MENU during Touch Pen mode
Only “STANDARD” or “DYNAMIC” can be selected in
PICTURE MENU during Touch Pen mode.
If “CINEMA” or “MONITOR” has been selected and
you set to Touch Pen mode, the setting of PICTURE
MENU changes to “STANDARD”.
Notes:
When “MONITOR” is selected in PICTURE MENU, the
following menu items cannot be set.
EXTENDED LIFE SETTINGS: PEAK LIMIT (see page 42)
MULTI DISPLAY SETUP menu: VIDEO WALL UNIFORMITY (see page 49)
PORTRAIT SETUP menu: VIDEO WALL UNIFORMITY (see page 51)
If you would like to change the picture and color of the
selected PICTURE menu to something else, adjust using
the items in the PICTURE menu. (see next page)
Press the left or right button to switch between modes.
NORMAL (9300K)
COOL (11500K)
WARM (6500K)