49
Using Network Function
This unit has a network function to control the network connected display with your computer.
Note:
To use the network function, set each “Network Setup” setting and make sure to set the “Control I/F Select” to “LAN”.
(see page 43)
When “LAN” is set, power indicator lights orange under the condition of power “Off” with remote control (stand-by
state).
Network Connection
Notes:
• Make sure the broadband router or hub supports 100BASE-TX.
• Use a LAN cable that is compliant with “CAT5” or higher standards.
• Touching the DIGITAL LINK terminal with a statically charged hand (body) may cause damage due to its
discharge.
Do not touch the DIGITAL LINK terminal or a metal part of the LAN cable.
• For instructions on how to connect, consult your network administrator.
Display (main unit, rear)
Remove the terminal cover (see page 9)
Hub or broadband router
LAN cable
(not supplied)
COMPUTER
Example of network connection
