Panasonic TH-47LFX6 Operating Instructions Manual Download Page 50

Page: 50 / 71

Maintenance information

Messages related to the air

lter condition, fan operating status and inspection noti

cations are displayed.

When “Please clean

lters. Then, click “START TEST”. Consult owner’s manual for instructions.” is displayed,

remove and clean the air

lter. (see page 5)

If “Please clean

lters. Then, click “START TEST”. Consult owner’s manual for instructions.” is displayed again a

short period after cleaning the air

lter, contact the service provider.

If “Please contact service provider.” is displayed, contact the service provider.
• After cleaning the air

lter, press

to execute the status test again and check the maintenance information.

FAN

The status of each fan is displayed.
If “SERVICE” is displayed, contact the service provider for inspection of the fan.

Maintenance information

START TEST

Fan inspection required.
Please contact service provider.

No.1

No.3

No.5

No.2

No.4

No.6

SERVICE

INSIDE

FAN

Maintenance information related to the fan and air

lter is displayed.

Press

“No.1” to “No.6” from the right

Note:

When viewed from the back, the fans are displayed as “No.1” to “No.6” in order starting from the right side. Interior
circulation fans inside the Display are indicated as “INSIDE”.

2/2

Setup

MULTI DISPLAY Setup

Set up TIMER

PRESENT TIME Setup

Network Setup

Menu Display Duration

15 S

Menu Transparency

Outdoor mode

Maintenance information

Summary of Contents for TH-47LFX6








































































Search results

Summary of Contents for TH-47LFX6

Reviews:

Related manuals for TH-47LFX6

Brands by name

Popular brands

Panasonic TH-47LFX6, Operating Instructions Manual

Search results

Summary of Contents for TH-47LFX6

Reviews:

Related manuals for TH-47LFX6

Brands by name

Popular brands