Panasonic TH-42LF8U Operating Instructions Manual Download Page 55

Page: 55 / 108

English

[IP address]:

(IP address display and setting)

Enter an IP address when DHCP server is not used.

[Subnet mask]:

(Subnet mask display and setting)

Enter a Subnet mask when DHCP server is not

used.

[Gateway]:

(Gateway address display and setting)

Enter a gateway address when DHCP server is not

used.

Note

●

When [DHCP] is set to [On], the IP address, etc. will

be displayed in grey.

Entering numbers

92.168. 0. 8

IP address

1.  Select the address and press <ENTER>.
2.  Select digits with    .
3.  Change numbers with    .
4.   Press  <ENTER>.

You can cancel the change by pressing

<RETURN>.

Select [Save] and press <ENTER>.

Save the current network Setup.

Note

●

To use a DHCP server, make sure the DHCP

server is started.

●

Contact your network administrator for details on

[IP address], [Subnet mask] and [Gateway].

●

Shipping condition
[DHCP]: Off
[IP address]: 192.168.0.8
[Subnet mask]: 255.255.255.0
[Gateway]: 192.168.0.1

[Port]

Set the port number used for command control.

Select [Port] and press <ENTER> to set the number.

●

The available setting range is 1024 - 65535.

●

Entering numbers (see page 55)

Note

●

When the PJLink protocol is used, the port setting is

not necessary.

[MAC address]

Displays the MAC address of this unit.

■

[Network status]

Checks the current Network settings status.

192. 168. 0. 1

255. 255. 255. 0

192. 168. 0. 8

12:34:56:78:9A:BC

Network status

DHCP
IP address
Subnet mask
Gateway
MAC address

Off

■

[DIGITAL LINK mode] (LF80 series only)

Switches communication method of DIGITAL LINK

terminal.

[Auto]:

Communication method is selected automatically.

[DIGITAL LINK]:

Communication method is fixed to DIGITAL LINK.

[Ethernet]:

Communication method is fixed to Ethernet.

[Long reach]:

Communication method is fixed to Long reach.

Modes allowing communication

Valid

― :

Invalid

Settings

Communication validity

Picture

transmission Ethernet RS-

232C

100 m 150 m

Auto

For

DIGITAL

LINK

―

For Long

reach

―

For

Ethernet

―

DIGITAL LINK

―

Long reach

―

Ethernet

―

Note

●

When connected with the [Long reach]

communication method, the maximum

transmission distance is 150 m. In this case, this

unit can receive the signals of up to 1080/60p

(148.5 MHz).

●

If the communication method of the twisted

pair cable transmitter is set to [Long reach], set

[DIGITAL LINK mode] to [Auto]. Then, connection

is enabled with the [Long reach] communication

method.
When connecting with the separately sold DIGITAL

LINK Switcher (ET-YFB200G) with the [Long

reach] communication method, set [DIGITAL LINK

mode] to [Long reach].

Summary of Contents for TH-42LF8U













































































































Search results

Summary of Contents for TH-42LF8U

Reviews:

Related manuals for TH-42LF8U

Brands by name

Popular brands

Panasonic TH-42LF8U, Operating Instructions Manual

Search results

Summary of Contents for TH-42LF8U

Reviews:

Related manuals for TH-42LF8U

Brands by name

Popular brands