Panasonic TH-42LF80U Operating Instructions Manual Download Page 48

Page: 48 / 108

English

Screensaver

(For preventing image retention)

Do not display a still picture, especially in 4:3 mode, for

any length of time.
If the display must remain on, a Screensaver should be

used.

Screensaver

Start

10:00

Mode

Off

THURSDAY

2015/01/01

■

Screensaver settings

Screensaver operation

When the Screensaver is operating, the following 5

patterns are displayed full screen for 5 seconds each,

and it will be repeated.

Black →

Dark grey

→

Grey

→

Light grey

→

White

→

Light grey

→

Grey

→

Dark grey

To start Screensaver now

Select [On] in [Mode].
Select [Start] and press <ENTER>.

●

The menu screen will disappear and the

Screensaver will be activated.

Screensaver

Start

10:00

Mode

THURSDAY

2015/01/01

Note

●

If the following buttons are pressed while the screen

saver is operating, the screen saver is cancelled.
Remote control: <RETURN>
Main unit: <MENU (Unit)> <INPUT> <+ (Unit)>

<- (Unit)> <ENTER (Unit)>

●

When the display is turned off, the Screensaver will

be deactivated.

To set interval of Screensaver

Select [Interval] in [Mode].
Set [Periodic time].

●

Press to change the time by 15 minutes.

●

In [ENGLISH(US)] OSD language, [Periodic time]

is displayed as [SHOW DURATION].

Set [Operating time].

●

Press once to change the time by 1 minute.

Keep pressing down to change the time by 15

minutes.

●

In [ENGLISH(US)] OSD language, [Operating

time] is displayed as [SAVER DURATION].

Periodic time

Deactivated.

Operating time

Screensaver

Start

Mode

Interval

Periodic time

Operating time

0:00

THURSDAY

2015/01/01

10:00

Note

●

It is not possible to set the duration of [Operating

time] longer than that of [Periodic time].

To set start and finish time of Screensaver

Select [Time designation] in [Mode].
Set [Start time] and [Finish time].

●

Press once to change the time by 1 minute.

Keep pressing down to change the time by 15

minutes.

●

In [ENGLISH(US)] OSD language, [Time

designation] is displayed as [TIME OF DAY].

Screensaver

Start

10:00

Mode

Time designation

Start time

Finish time

0:00

THURSDAY

2015/01/01

Note

●

Please set [Date and time] before setting [Start

time] and [Finish time]. (see page 53)

Summary of Contents for TH-42LF80U













































































































Search results

Summary of Contents for TH-42LF80U

Reviews:

Related manuals for TH-42LF80U

Brands by name

Popular brands

Panasonic TH-42LF80U, Operating Instructions Manual

Search results

Summary of Contents for TH-42LF80U

Reviews:

Related manuals for TH-42LF80U

Brands by name

Popular brands