42
Setup menu
Power save
PC Power management
No signal power off
No activity power off
Off
On
When this function is turned On, luminous level of the Plasma Display is suppressed, so power consumption is
reduced.
Disable
Enable
Equipment power supply is turned Off when there is no signal.
When this is set to “Enable”, the power supply of the unit goes Off 10 minutes after the input signals stop.
Enable
Disable
When this function is set to “Enable”, the power is turned off (standby) automatically when there is no operation of
the Plasma Display for 4 hours.
Starting from 3 minutes before the turn off, the remaining time will be displayed.
When the power is turned off due to this function, a message “Last turn off due to ’No activity
power off’.” is displayed next time the power is turned on.
Note:
During the screensaver is running, this function is disabled.
No activity power off 3min
Press any key to abort.
Off
On
When this function is set to On, it operates under the following conditions to turn the power on or off automatically.
When no pictures (HD/VD sync signals) are detected for 30 or so seconds during PC signal input:
→
Power is turned off (standby); the power indicator lights up orange.
When pictures (HD/VD sync signals) are subsequently detected:
→
Power is turned on; the power indicator lights up green.
Notes:
• This function operates only during PC signal input.
• This function is effective when “Sync” is set to “Auto”, “Component / RGB-in select” is set to “RGB”.
When this function is set to On, it operates under the following conditions to turn the power on or off automatically.
When no pictures (sync signal) are detected for 30 or so seconds during DVI signal input:
→
Power is turned off (standby); the power indicator lights up orange.
When pictures (sync signal) are subsequently detected:
→
Power is turned on; the power indicator lights up green.
Notes:
• This function operates only during DVI signal input.
• This function is invalid during input from DVI-D Terminal Board (TY-FB11DD) and Dual DVI-D Terminal Board for
3D (TY-FB30DD3D).
• Depending on the type of terminal board equipped, this function may be invalid.
DVI-D Power management
When this function is turned On, power consumption of the microcomputer is reduced during power supply standby
(see page 15, 19, 20), so standby power of the set is reduced.
Standby save
