,
Y , P
B
,
P
R
OUT
P
R
P
B
Y
AUDIO
OUT
R
L
VIDEO
OUT
AUDIO
OUT
R
L
11
Connections
VIDEO and COMPONENT / RGB IN connection
Video equipment connection
SLOT:
Terminal board (optional
accessories) insert slot
(see
page 4)
Note:
The right side slot is for factory
use only. The terminal board with
1-slot width does not function
when installed in the right side
slot.
LAN:
Connect to a network to control the unit.
(see page 65)
Terminals are on the
bottom side of the
Plasma Display.
AV IN (VIDEO):
Composite Video Input Terminal (see below)
COMPONENT/RGB IN:
Component/RGB Video Input Terminal
(see below)
AV IN (HDMI):
HDMI Input Terminal (see page 12)
Connect to video equipment such as VCR or DVD player.
3D IR TRANSMITTER:
Connect the 3D IR
TRANSMITTER
(optional accessory).
SERIAL:
Control the
Plasma Display
by connecting
to PC (see
page 14)
Notes:
• Change the “Component/RGB-in select” setting in the “Setup”
menu to “Component” (when Component signal connection) or
“RGB” (when RGB signal connection). (see page 40)
• Signals input to COMPONENT/RGB IN terminals correspond to
Sync on G or Sync on Y.
RCA-BNC
Adapter plug
RCA-BNC
Adapter plug
DVD Player
VCR
Computer
RGB Camcorder
Note:
Additional equipment, cables and adapter plugs
shown are not supplied with this set.
DVI-D IN:
DVI-D Input Terminal
(see page 12)
PC IN:
PC Input Terminal
Connect to video terminal of PC
or equipment with Y, P
B
(C
B
) and
P
R
(C
R
) output (see page 13).
