English
90
Options Adjustments
This unit offers special functions conveniently used
according to the installation location and application.
1
Press <SETUP>.
[Setup] menu screen will be displayed.
2
Select [OSD language] with
and press <ENTER> for more than 3
seconds.
Following screen will be displayed.
Options
Display software information
USB data cloning
Software licenses
Shipping
OpenPort PLATFORM Shutdown
3
Select [Options] with and press
<ENTER>.
[Options] menu screen will be displayed.
1/3
0
0
Options
Input search
Failover/Failback
Audio input select
Onscreen display
Initial VOL level
Initial input
Maximum VOL level
Input lock
Button lock
Controller user level
PC auto setting
Off
Off
Off
On
Off
Off
Off
Off
2/3
0
---
Options
Off-timer function
Initial startup
Startup logo
Display ID
Controller ID function
Serial ID function
Information timing
Off
Off
Enable
Last memory
Off
Serial response(ID all)
Off
Serial daisy chain position
3/3
Options
Power on screen delay
Clock display
Power on message(No activity power off)
Power on message(Power management)
POWER button lock
Off
On
On
Off
Off
Note
●
[POWER button lock] function is only for TH-
55AF1U, TH-49AF1U and TH-42AF1U.
4
Select the item to set with .
For [Input search], [Failover/Failback], [Audio input
select] and [Information timing], the submenu screen
will be displayed when you press <ENTER>.
(see page 91, 94, 97)
5
Set with .
6
Press <SETUP> to exit from [Options]
menu.
Note
●
The remote control is necessary to display the
[Options] menu. The control panel buttons on the
main unit cannot be used to display the menu.
●
Press <RETURN> to return to the previous menu.
●
The serial number and the software version of this
unit are displayed when [Display software information]
is selected in step 3.
(Supported by the Main version software (Ver. 2.00
or later))
●
The software License is displayed when [Software
licenses] is selected in step 3.
Input search
When a signal is not detected, another input with a
signal is automatically selected.
Note
●
The OpenPort PLATFORM input is not a target of the
“no signal” detection. It is excluded from this function.
Select the item with .
Select the set point with .
Input search
Input search
1st search input
2nd search input
Custom
(None)
(None)
[Input search]
[Off]:
When there is no signal, the input is not switched
automatically.
[All inputs]:
Searches all inputs except [OpenPort PLATFORM],
and switches to an input with a signal.
Input search is executed in the following order.
(Example) When the current input is [HDMI1]
[HDMI2
] → [
DVI-D
] → [
PC
] → [
COMPONENT]
*
→
[VIDEO
] → [
USB
] → [
HDMI1]