Panasonic TH-42AF1U Operating Instructions Manual Download Page 104

Page: 104 / 123

English

104

Command

Control

AVMT?

Shutter control query

11:  Picture Off (picture on mute)
21:  Audio Off (audio on mute)
30:  Shutter mode Off

(picture and audio mute

deactivated)

31: Shutter mode On

(picture and audio on mute)

ERST?

Error status query

First byte: 0
Second byte: 0
Third byte: 0
Fourth byte: 0
Fifth byte: 0
Sixth byte: Other error. 0 or 2.

●

Meaning of 0, 2.
0: Error is not detected,
2: Error

LAMP?

Lamp status query

Not supported

INST?

Input switch list query

11: PC IN input (PC)
21: COMPONENT/RGB IN input

(COMPONENT)

22: VIDEO input (VIDEO)
31: OpenPort PLATFORM input

(OpenPort PLATFORM)

32:  HDMI 1 input (HDMI1)
33: HDMI 2 input (HDMI2)
34:  DVI-D IN input (DVI-D)
41:  USB input (USB)

NAME?

Display name query

Returns settings detail of [LAN

Control] - [Display name] in OpenPort

PLATFORM.

INF1?

Manufacturer name query

Returns “Panasonic”.

INF2?

Model name query

Returns “55AF1U” / “55AF1W”.
(Example: 55-inch AF1U / AF1W

model)

INFO?

Other information query

Returns version number.

CLSS?

Class information query

Returns “1”.

PJLink security authentication

The password used for PJLink is the same as the

password set in [LAN Control] in OpenPort PLATFORM.

(see page 54)
When using PJLink without security authorization, set

use without the password (blank space) in [LAN Control]

in OpenPort PLATFORM.

●

Concerning the specification of PJLink, see the web

site of Japan Business Machine and Information

System Industries Association (JBMIA) below:
http://pjlink.jbmia.or.jp/english/index.html

Early Warning Software

This unit supports “Early Warning Software” which

monitors the statuses of devices (projectors or displays)

connected to an intranet, reports failures of devices

and gives advance warning by detecting a predicted

abnormality.
The maximum number of devices that can be registered

to monitor differs according to the type of license. Up

to 2048 devices can be registered and used for free for

a maximum of 90 days after the installation to PC has

completed.

●

For details, see the following website.
https://panasonic.net/cns/prodisplays/

Note

●

This unit does not support WEB control function.

Multi Monitoring & Control Software

This unit supports “Multi Monitoring & Control Software”

which monitors and controls devices (projectors or

displays) connected to an intranet.

●

For details, see the following website.
https://panasonic.net/cns/prodisplays/

Note

●

This unit is not compatible with WEB control function or

content list distribution function.

Content Management Software

This unit supports “Content Management Software”

to create schedule data on a PC required to play

back still pictures and motion pictures by using the

[SignagePlayer] application (see page 62).
(Supported on the firmware (Ver. 2.0 or later) of the

OpenPort PLATFORM system)

●

For details, see the following website.
https://panasonic.net/cns/prodisplays/

Note

●

This unit supports only the schedule play of still

pictures, motion pictures and those playlists.

Summary of Contents for TH-42AF1U




























































































































Search results

Summary of Contents for TH-42AF1U

Reviews:

Related manuals for TH-42AF1U

Brands by name

Popular brands

Panasonic TH-42AF1U, Operating Instructions Manual

Search results

Summary of Contents for TH-42AF1U

Reviews:

Related manuals for TH-42AF1U

Brands by name

Popular brands