16
Basic Controls
Remote Control Transmitter
Standby (ON / OFF) button
The Plasma Display must rst be plugged into the wall
outlet and turned on at the power switch (see page 12).
Press ON to turn the Plasma Display On, from Standby
mode. Press OFF to turn the Plasma Display Off to
Standby mode.
SET UP button
(see page 22)
SOUND button
(see page 34)
DIRECT INPUT buttons
Press the INPUT “1”, “2”, “3” or “PC”
input mode selection button to select
the INPUT mode. (see page 14)
This button is used to switch directly
to INPUT mode.
Channel Adjustment
This button cannot be used for this model.
Volume Adjustment
Press the Volume Up “+” or Down
“–” button to increase or decrease
the sound volume level.
OFF TIMER button
The Plasma Display can be preset
to switch to stand-by after a xed
period. The setting changes to 30
minutes, 60 minutes, 90 minutes and
0 minutes (off timer cancelled) each
time the button is pressed.
30
60
0
90
When three minutes remain, “OFF
TIMER 3” will ash.
The off timer is cancelled if a power
interruption occurs.
Remote ID lock
(see page 45)
Digital Zoom
(see page 21)
MULTI Window buttons
(see page 18)
Status button
Press the “Status” button to display
the current system status.
1
Input label
2
Aspect mode (see page 17)
NANODRIFT SAVER operating
(see page 39)
3
Off timer
The off timer indicator is displayed only
when the off timer has been set.
4
Clock display (see page 57)
R button
(see page 22)
Press the R button to return to previous menu screen.
POSITION buttons
ACTION button
Press to make selections.
POS. /SIZE button
(see page 24)
PICTURE button
(see page 27)
INPUT button
Press to select INPUT1, INPUT2,
INPUT3 and PC input SLOTS
sequentially. (see page 14)
When a dual input terminal board
is attached, A or B is displayed
depending on the selected input
signal. (Ex. INPUT1A, INPUT1B)
Sound mute On / Off
Press this button to mute the sound.
Press again to reactivate sound.
Sound is also reactivated when power is
turned off or volume level is changed.
Numeric buttons
(see page 45)
ASPECT button
Press to adjust the aspect.
(see page 17)
SURROUND button
N button
(see page 26, 27, 28, 34)
The surround setting switches on
and off each time the SURROUND
button is pressed.
The bene ts of surround sound
are enormous. You can be
completely enveloped in sound;
just as if you were at a concert
hall or cinema.
ON
SURROUND
ON
OFF
OFF TIMER 90
1
2
3
4
1 0 : 0 0
PC
4:3
NANODRIFT
