Panasonic TH-103PF10WK Service Manual Download Page 46

Page: 46 / 126

TH-103PF10WK/TK/RK

7.39. Removal of DR1-Board (B)

Attaching short jumper to connector (DR6).

Attach Short Jumper to the connector (DR6) when replacing
DR1-Board.

1. Disconnect the connectors (DR1, DR2, DR3, DR4, DR5).
2. Remove 5 screws and then remove DR1-Board (B).
3. Remove Short Jumper attaching to the connector (DR6)

on DR1-Board you removed and attach it to the connector
(DR6).

7.40. Removal of DR2-Board (A)

1. Disconnect the connectors (DR11, DR12, DR13, DR14,

DR15).

2. Remove 5 screws and then remove DR2-Board (A).

7.41. Removal of DR2-Board (B)

Attaching short jumper to connector (DR16).

Attach Short Jumper to the connector (DR16) when replacing
DR2-Board.

1. Remove 4 screws and then remove Fan Block (E).

2. Disconnect the connectors (DR11, DR12, DR13, DR14,

DR15).

3. Remove 5 screws and then remove DR2-Board (B).
4. Remove Short Jumper attaching to the connector (DR16)

on DR2-Board you removed and attach it to the connector
(DR16).

Summary of Contents for TH-103PF10WK































































































































Search results

Summary of Contents for TH-103PF10WK

Reviews:

Related manuals for TH-103PF10WK

Brands by name

Popular brands

Panasonic TH-103PF10WK, Service Manual

Search results

Summary of Contents for TH-103PF10WK

Reviews:

Related manuals for TH-103PF10WK

Brands by name

Popular brands