Panasonic TH-103PF10WK Service Manual Download Page 28

Page: 28 / 126

TH-103PF10WK/TK/RK

7.5.

Removal of HDMI-Board

1. Remove 4 screws (E) and then remove the HDMI Termi-

nal Block.

2. Remove 4 screws (F) and remove Shield Plate.
3. Remove 2 Hexagonal-Head screws (G) and then remove

HDMI-Board.

7.6.

Removal of DS-Board

1. Disconnect the connectors (DS1, DS2, DS3, DS4, DS6,

DS9, DS10, DS14, DS15, DS30).

2. Remove 5 screws and then remove the Slot Block Case.

3. Remove 11 screws and then remove DS-Board.

7.7.

Removal of HX-Board

1. Remove the HA Terminal Block.

(Refer to Removal of HA-Board)

2. Remove the HDMI Terminal Block.

(Refer to Removal of HDMI-Board)

3. Disconnect the connectors (HX1).
4. Remove 4 screws and then remove the Slot Block Case.

5. Remove 4 Hexagonal-Head screws (H) and 2 screws on

Summary of Contents for TH-103PF10WK































































































































Search results

Summary of Contents for TH-103PF10WK

Reviews:

Related manuals for TH-103PF10WK

Brands by name

Popular brands

Panasonic TH-103PF10WK, Service Manual

Search results

Summary of Contents for TH-103PF10WK

Reviews:

Related manuals for TH-103PF10WK

Brands by name

Popular brands