50
Before Requesting Help
Problem
You cannot program items,
such as the dialing mode.
Previously programmed
information is erased.
You cannot store a name and
phone number in the directory.
While programming or
searching, the unit starts to
ring and stops the
program/search.
The unit does not display the
caller’s name and/or phone
number.
The display goes to the
stand-by mode while viewing
the Caller List.
When a second call is
received during a
conversation, the unit does not
display the new caller’s name
and/or phone number.
Remedy
•
Programming is not possible while the
unit is in the talk mode or when viewing
caller information.
•
Do not pause for over 60 seconds
while programming.
•
or
may have been pressed
when you picked up the handset. Press
(EXIT/CH)
,
and try again.
•
If a power failure occurs, programmed
information may be erased. Reprogram
if necessary.
•
You cannot store an item in the
directory while the unit is in the talk
mode.
•
Do not pause for over 60 seconds
while storing.
•
To answer the call, press
(TALK)
.
Start again from the beginning after
hanging up.
•
Other telephone equipment may be
interfering with your phone. Disconnect
it and try again.
•
Other electrical appliances connected
to the same outlet may be interfering
with the Call Display information.
•
Telephone line noise may be affecting
the Call Display information.
•
Do not pause for over 60 seconds
while searching.
•
The line mode selection is incorrect.
See page 15.
