Panasonic TG2550 - 2.4 Gigarange Cordless Phone Operating Instructions Manual Download

Page: 43 / 56

Advanced Operation

To turn the “C.WTG (Call Waiting) options” mode on

Make sure that the handset is in the stand-by mode.

To turn the “C.WTG (Call Waiting) options” mode off

, press

in step 6.

Press

(FUNCTION/EDIT)

Press

repeatedly until the arrow

points to “

Program

”.

Press

(

Yes

key).

Press

repeatedly until the arrow

points to “

C.WTG options

”.

Press

(

Yes

key).

Press or to

select

“

”.

Press

(

Save

key).

•

A beep sounds.

•

The display will return to the function list.
To return to the stand-by mode, press

(EXIT/CH)

or wait for 60 seconds.

Ringer volume

Program

∨∧

OK=Yes

Chnge language

C.WTG options

∨∧

OK=Yes

C.WTG options

:Off

∨∧

OK=Save

C.WTG options

:On

∨∧

OK=Save

C.WTG options

:On

•

You can exit the programming mode any time by pressing

(EXIT/CH)

Summary of Contents for TG2550 - 2.4 Gigarange Cordless Phone

























































Search results

Summary of Contents for TG2550 - 2.4 Gigarange Cordless Phone

Reviews:

Related manuals for TG2550 - 2.4 Gigarange Cordless Phone

Brands by name

Popular brands

Panasonic TG2550 - 2.4 Gigarange Cordless Phone, Operating Instructions Manual

Search results

Summary of Contents for TG2550 - 2.4 Gigarange Cordless Phone

Reviews:

Related manuals for TG2550 - 2.4 Gigarange Cordless Phone

Brands by name

Popular brands