Panasonic TG2550 - 2.4 Gigarange Cordless Phone Operating Instructions Manual Download

Page: 19 / 56

Basic Operation

Making Calls

Press

(TALK)

Dial a phone number.

•

The dialed number is displayed.

•

After a few seconds, the display will show
the length of the call and the battery
strength.

To hang up, press

(TALK)

or place the

handset on the base unit.

Talk

1112222

Talk

00-00-00

•

If “

No link to base Place on cradle and try again.

” is

displayed and an alarm tone sounds in step 1, move closer to the base
unit or place the handset on the base unit, and try again.

To redial the last number dialed

Press

(FUNCTION/EDIT)

➡

(TALK)

To redial after confirming the numbers in redial memory

1. Press

(FUNCTION/EDIT)

2. While the arrow points to “

Redial

”, press

•

The last number dialed is displayed.

3. Press

(TALK)

(FUNCTION/EDIT)

, ,

(EXIT/CH)

Summary of Contents for TG2550 - 2.4 Gigarange Cordless Phone

























































Search results

Summary of Contents for TG2550 - 2.4 Gigarange Cordless Phone

Reviews:

Related manuals for TG2550 - 2.4 Gigarange Cordless Phone

Brands by name

Popular brands

Panasonic TG2550 - 2.4 Gigarange Cordless Phone, Operating Instructions Manual

Search results

Summary of Contents for TG2550 - 2.4 Gigarange Cordless Phone

Reviews:

Related manuals for TG2550 - 2.4 Gigarange Cordless Phone

Brands by name

Popular brands