LCD High Definition TV Model Differences
Differences between Models
The significant differences between models associated with the TC-22LR30 combo unit
CD TV Section
ore IC series that are used for the Video Signal processing, the
(TC-
VD-RAM Section
.A. (Circuit Board M8) is the same as that of the DVD Recorder
for servicing
ircuit Board A
put signal lines for the DVD Recorder Circuit were added to the Video
utput signal lines for the DVD Recorder Circuit were added to the Audio
Audio Signal Process (IC3299) was added to record SAP to the DVD.
ircuit Board DG
troller (IC1106)
software was modified from the previous model to
ircuit Board RD (Main DVD Bd.)
ommodate DVD Recorder.
ircuit Board M8 (DVD Digital Bd.)
modate the DVD Recorder. The
on the DMR-
ircuit Board DV (HDMI Interface)
mmodate the High Definition Multimedia Input
ircuit Board P and AP
ndary Power Circuit Board (AP) were changed to incorporate
the voltages required to power the DVD Recorder.
(TC-26/32LX20 series) can be found in the following areas.
L
The GC3 Global c
Microcontroller, the Video SW, and the Audio SW are same as that of the LCD TV
26/32LX20).
D
The DVD Digital C.B
(DMR-E65). However, the software that resides in (IC6702) is different.
The equipment used for servicing the DMR-E65 is same as the one used
this model’s DVD-RAM Drive .The only difference is that the DVD Recorder (DMR) has
been downsized to a physically smaller drive.
C
The input and out
SW (IC3101).
The input and o
SW (IC3102).
The MTS/SAP
C
The Main Micro con
incorporate communication with the DVD Recorder Circuit.
C
This Circuit Board was added to acc
C
This Circuit Board was added to accom
Microcontroller (IC6001) on this Board is identical to the one that resides
E65 Controller board and functions accordingly.
C
This Circuit Board was added to acco
(HDMI).
C
The Primary (P) and Seco
4
