Panasonic TA824 User Manual Download

Page: 61 / 159

1.4 During a Conversation

User Manual

1.4.8

Talking to Another Party without Lifting the Handset
(Hands-free Operation)

To switch from the handset to hands-free mode

To switch from hands-free mode to the handset

You can have a conversation in hands-free mode using the SP-PHONE button.

•

Helpful hints for hands-free operation:

•

If it is difficult to hear the other party's voice:

Increase the volume using the Navigator Key or Volume Key.

•

If the other party has difficulty hearing you:

Decrease the volume.

•

If the other party reports that your voice echoes:

Use the telephone in a room that has curtains, carpeting or both.

•

If parts of the conversation cannot be heard:

If you and the other party speak at the same time, parts of your conversation may be
lost. To avoid this, try to speak alternately.

Press

SP-PHONE

On-hook.

During a conversation using the handset

Do not go on-hook without pressing
the SP-PHONE button first, or the
call will be disconnected.

Off-hook.

During a conversation in hands-free mode

Summary of Contents for TA824
































































































































































Search results

Summary of Contents for TA824

Reviews:

Related manuals for TA824

Brands by name

Popular brands

Panasonic TA824, User Manual

Search results

Summary of Contents for TA824

Reviews:

Related manuals for TA824

Brands by name

Popular brands