![background image](http://html.mh-extra.com/html/panasonic/svap10u-sd-printer/svap10u-sd-printer_operating-instructions-manual_275316048.webp)
Others
48
Before Requesting Service
If trouble persists even when the action suggested below
has been taken, press the Power Button to turn off the
power or disconnect and re-connect the AC Power Cord.
1:
The cursor cannot be moved in the direction
shown on the arrows by pressing the
buttons with this unit.
1:
Select [Layout] correctly.
2:
The power cannot be switched on.
2:
The power plug is not plugged in correctly.
3:
No picture appears on the screen.
3-1: The card is not properly inserted.
3-2: A card with a different format than that which can be
used by the Photo Printer is being used.
e.g. SD/MMC/CF can be used.
㸢
Pictures from the card cannot be printed with the
Photo Printer.
4:
The printer does not print.
4-1: The Ink Cassette is not oriented properly, or was not
pushed all the way in.
4-2: There is slack in the Ink Film.
㸢
Take up the slack in the Ink Film.
4-3: The Paper Cassette is not oriented properly, or was
not pushed all the way in.
4-4: The paper was loaded back and front in the reverse
side.
4-5: The internal temperature of the printer is too high.
㸢
Wait.
5:
Printing is not of the expected quality.
5-1: The paper being used is not of the specified type.
5-2: The paper was not loaded correctly.
5-3: Thermal head is dirty.
5-4: Condensation has formed.
㸢
Wait.
6:
The printed colors are not correct.
6:
The print image has not been adjusted correctly.
7:
The printed pictures are distorted.
7-1: The printer is located near a television, video game,
or other source of electromagnetic waves.
㸢
Move the printer so that it is at least one meter
away from the television, video game, etc. Keep
away from this type of equipment.
7-2: The printer is located near a stereo speaker, large
motor, or other source of a strong magnetic field.
㸢
Move the printer away from the device generating
the magnetic field. Keep away from this type of
equipment.
8:
The printer does not respond when a button is
pressed.
8-1: The internal temperature of the printer is too high.
㸢
Wait.
8-2: Printing is in progress.
㸢
Wait until printing is complete.
8-3: The ink cassette which the ink lacks is inserted.
㸢
Insert a new ink cassette.
9:
Paper jams occur frequently.
9-1: More than 36 sheets of paper (or 25 sheets of 4" x 5-
7/8" (100 x 148 mm) printing paper) have been
loaded in the Paper Cassette.
9-2: The paper is creased or curled.
10: The MENU screen does not appear.
10: Printing is in progress.
㸢
Wait until printing is complete.
11: It takes a long time for an image to appear.
11: Depending on the image system for storing images in
the card and its capacity, it can take 20 to 30 seconds
to display the image.
㸢
This is not a malfunction.
12: It takes a long time for the initial screen to
appear.
12: It may take a long time for the initial screen to appear
when a lot of pictures are recorded onto the card.
㸢
This is not a malfunction.
13: The number is different than that selected in
[Number], under [OPTION].
13: The printer is performing a DPOF print.
㸢
Only the number of pages configured with DPOF
will be printed.
14: Images stored in a card cannot be copied.
14-1:There are no images stored in the card.
14-2:The INPUT method was not correctly selected.
14-3:The card is write-protected.
14-4:The card's memory has been used up.
15: Images in the card cannot be erased.
15-1:There are no images stored in the card.
15-2:The INPUT method was not correctly selected.
15-3:The picture is set to write-protect in the camera or
computer.
㸢
Change the write-protect setting in the camera or
computer, and then erase.
16: The Remote Controller does not operate
correctly.
16-1:The batteries are exhausted. Replace with new
batteries.
16-2:The remote controller is not facing the Remote
Control Sensor.
16-3:There is an obstruction between the Photo Printer
and Remote Controller.
Summary of Contents for SVAP10U - SD PRINTER
Page 57: ...57 ...