background image

6

There are 2 sets of operating instructions for the WV-NS202A as follows.

• Installation Guide (book, these operating instructions)
• Network Operating Instructions (PDF)

The "Installation Guide" contains descriptions of how to install and connect this camera, and how perform the required
network settings. 
Refer to the "Network Operating Instructions (PDF)" on the provided CD-ROM for descriptions of how to perform the
camera settings and how to operate this camera. Adobe

®

Reader is required to read the network operating instruc-

tions (PDF).

About these operating instructions

CPU: Pentium

®

4 2.4 GHz or faster

Memory: 

512 MB or more

Network Interface:

10/100 Mbps Ethernet port x1

Audio Interface:

Sound card (when playing audio)

Monitor:

Resolution: 1 024 x 768 pixels or more
Color: 24-bit True color or better

OS: Microsoft

®

Windows

®

2000 Professional SP4

Microsoft

®

Windows

®

XP Home Edition SP2

Microsoft

®

Windows

®

XP Professional SP2

Web Browser: 

Microsoft

®

Internet Explorer

®

6.0 SP2

Microsoft

®

Internet Explorer

®

7.0

Microsoft

®

Internet Explorer

®

6.0 SP1 only when using Windows

®

2000 Professional SP4, 

Other:

CD-ROM Drive: It is necessary to read the network operating instructions and use the soft-
ware on the provided CD-ROM.
DirectX

®

9.0c or later

Adobe

®

Reader: It is necessary to read the network operating instructions on the provided

CD-ROM.

Notes:

• When using a PC that does not meet the above requirements, displaying of images may become slow or the web

browser may become inoperable.

• Audio may not be heard if a sound card is not installed on a PC. Audio may be interrupted depending on the net-

work environment. 

System requirements for a PC

• Microsoft, Windows, Internet Explorer, and DirectX

are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or
other countries.

• Intel and Pentium are trademarks or registered

trademarks of Intel Corporation or its subsidiaries
in the United States and other countries.

• Adobe and Reader are either registered trade-

marks or trademarks of Adobe Systems
Incorporated in the United States and/or other
countries.

• SD logo is a trademark.
• Other names of companies and products con-

tained in these operating instructions may be
trademarks or registered trademarks of their
respective owners.

Trademarks and registered trademarks

Summary of Contents for Super Dynamic III WV-NS202A





























Reviews: