Panasonic SLPR300 - CD RECORDER, Service Manual

Page: 27 / 88

2. When the blinking display of the disc distinction ends, “MENU”
key is pushed.
*The menu display changes if “MULTI JOG” knob of the main
body is turned. (Refer to Fig. 12-1.)
Fig. 12-1
Note:
The execution of the each item is completed or either “CANCEL” key, “CD-RW STOP” key or
“MENU” key is pushed when going out of the menu mode.
12.2. Running operation
When this mode is executed, the operation of the recording and the playback is repeated.
12.2.1. Preparations
1. Recorded disc or CD-DA (*Time for the running operation and the
number of pickup operations can be adjusted by changing the
data written in this disc.)
2. CD-RW of the blank disc
3. Put the Recorded disc (or CD-DA) in tray 1 of changer mechanism
and put CD-RW of the blank disc in recording mechanism.
12.2.2. Setting method
1. “Service menu” is made to be displayed on the FL display
referring to the abovementioned.
2. “SYSTEM AGING” is made to turn “MULTI JOG” knob, and to be
displayed on the FL display.
3. The under-mentioned operation starts when “SET” key is pushed.
(Refer to Fig. 12-2.)
27