background image

#X ~x??x:=$

(1)  Subject to the exclusions stated in 2 (EXCLUSIONS) herein below, Panasonic Industrial Devices SUNX war-

rants the Products to be free of defects in material and workmanship for a period of one (1) year from the 
date of shipment under normal usage in environments commonly found in manufacturing industry.

(2)  Any Products found to be defective must be shipped to Panasonic Industrial Devices SUNX with all shipping 

costs paid by Purchaser or offered to Panasonic Industrial Devices SUNX for inspection and examination. 
Upon examination by Panasonic Industrial Devices SUNX, Panasonic Industrial Devices SUNX will, at its 
sole discretion, repair or replace at no charge, or refund the purchase price of, any Products found to be de-
fective.

X €z!J=:=$

(1)  This warranty does not apply to defects resulting from any cause:

(i)  which was due to abuse, misuse, mishandling, improper installation, improper interfacing, or improper repair by Purchaser;
(ii)         >\     \   \ +  ™
(iii)           „+„„    ƒ9    + +™
(iv) which was due to an operation or use by Purchaser outside of the limits of operation or environment 

  > } ‹ ¢›™

(v)   which was due to normal wear and tear; 
(vi)  which was due to Force Majeure; and
(vii) which was due to any use or application expressly discouraged by Panasonic Industrial Devices SUNX 

in 4 (CAUTIONS FOR SAFE USE) hereunder.

$' |  ?      + \    +      

which purchased from such purchaser for application.

3. DISCLAIMERS

(1)  Panasonic Industrial Devices SUNX's sole obligation and liability under this warranty is limited to the repair or 

replacement, or refund of the purchase price, of a defective Product, at Panasonic Industrial Devices SUNX's 
option.

$'  |~ˆ <ˆ>}<\ <ˆ>z@ˆ]ˆ|\ `< <ˆ{¢‹ } |~ˆ ˆ›@z¢}Šˆ <ˆ]ˆ‹  `{ |~ˆ >¢<@~ˆ<\ ‹ 

ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THE WARRAN-
|}ˆ `{ ]ˆ<@~|‚}z}| \ {}|ˆ {`<  ><|}@¢z< >¢<>`ˆ\ ‹ `„}{<}–ˆ]ˆ| `{ 
><`><}ˆ|<   <}–~|\ <ˆ  ~ˆ<ˆ‚   ˆ›><ˆz   ‹}@z}]ˆ‹  }  `  ˆŠˆ|  ~zz  >`}@ 
Industrial Devices SUNX AND ITS AFFILIATED ENTITIES BE LIABLE FOR DAMAGES IN EXCESS OF THE 
>¢<@~ˆ  ><}@ˆ  `{ |~ˆ  ><`‹¢@|\  `<  {`<    }‹}<ˆ@|\  }@}‹ˆ|z\  >ˆ@}z  `<  @`-
ˆ¤¢ˆ|}z  ‹]–ˆ  `{    ¥}‹\  –ˆˆ<z |ˆ<] ‹  @`‹}|}`  "  `<    ‹]–ˆ 
RESULTING FROM LOSS OF USE, BUSINESS INTERRUPTION, LOSS OF INFORMATION, LOSS OR 
}@@¢<@  `{ ‹|\ z` `{ ><`{}|\ z` `{ Š}–\ |~ˆ @`| `{ ><`@¢<ˆ]ˆ| `{ 
¢‚|}|¢|ˆ‹ –``‹\ ˆ<Š}@ˆ `< |ˆ@~`z`–}ˆ\ `< {`<   ]||ˆ< <}}– `¢| `{ `< 
} @`ˆ@|}` €}|~ |~ˆ ¢ˆ `< }‚}z}|  |` ¢ˆ |~ˆ ><`‹¢@|

4.  CAUTIONS FOR SAFE USE

(1)  |     9   99\    >¦        -

ability of the Products for any particular application, as well as to abide by Purchaser's applicable local laws and regulations, if any.

(2)     > `|   9  †{ˆ|  ˆ`<‡    9 ƒ  + 

or property. When such a use is made by Purchaser, such Purchaser shall indemnify and hold harmless Pana-
sonic Industrial Devices SUNX from any liability or damage whatsoever arising out of or in relation to such use.

(3)  In incorporating the Products to any equipment, facilities or systems, it is highly recommended to employ fail-safe designs, in-

9       ‰‰‰9\  9  9\  +  9   
    ƒ +  §\  \   9    + +  *\ +  

(4) The Products are each intended for use only in environments commonly found in manufacturing industry, 

\  ?    9\   \     \  -
rated into, any equipment, facilities or systems, such as those:
(a)  which are used for the protection of human life or body parts;
(b)         §   ƒ +    9 ™
'     ƒ       +      > }-

dustrial Devices SUNX in the catalogue or otherwise;

(d)  which may cause risk to life or property, such as nuclear energy control equipment, transportation equip-

ment (whether on rail or land, or in air or at sea), and medical equipment;

(e)  which are operated continuously each day for 24 hours; and
(f)  which otherwise require a high level of safety performance similar to that required in those equipment, 

facilities or systems as listed in (a) through (e) above.

5.  EXPORT CONTROL LAWS

 

In some jurisdictions, the Products may be subject to local export laws and regulations. If any diversion or re-export is 
to be made, Purchaser is advised to abide by such local export laws and regulations, if any, at its own responsibility.

http://panasonic.net/id/pidsx/global

7  = }7& <

2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan 
Phone: +81-568-33-7861  FAX: +81-568-33-8591

About our sale network, please visit our website.

PRINTED IN JAPAN

© Panasonic Industrial Devices SUNX Co., Ltd. 2013 

Summary of Contents for SL-PC104















Reviews: