Panasonic ShowStopper PV-SS2710, Service Manual

Page: 28 / 115

3. Set to TV mode, and then set to STEREO audio.
4. Adjust R4902 (SEPARATION) on the Main C.B.A. so that the signal
level is minimum.
Fig. E3
7.1.5. EVR (Electronic Variable Register) ADJUSTMENT WITH THE REMOTE CONTROL
This unit has electronic technology using I
2
C Bus concept.
The following control functions are adjusted by using "On Screen Displays" and the remote control
instead of adjusting mechanical controls (VR).
7.1.6. EVR ADJUSTMENT ITEM
The following Items need to be adjusted for EVR adjustment.
- SUB CONTRAST ADJUSTMENT
- CUT OFF, DRIVE ADJUSTMENT
- SUB COLOR/SUB TINT ADJUSTMENT
- V. HEIGHT/H. POSITION ADJUSTMENT
- WHITE BALANCE ADJUSTMENT
- SUB BRIGHTNESS ADJUSTMENT
7.1.7. HOW TO ENTER EVR ADJUSTMENT MODE
Press and hold STOP, VOL -, and EXIT buttons on the unit together over 5 seconds.
28