© Panasonic Industrial Devices SUNX Co., Ltd. 2016
- 8 -
1-3 Applicable Standards / Regulations
This device complies with the following standards / regulations.
<EU Directives>
EU Machinery Directive 2006/42/EC
EMC Directive 2004/108/EC (Valid until April 19, 2016)
EMC Directive 2014/30/EU (Valid from April 20, 2016)
RoHS Directive 2011/65/EU
<European Standards>
EN 61496-1 (Type 2), EN 55011, EN ISO 13849-1: 2008 (Category 2, PLc)
<International Standards>
IEC 61496-1/2 (Type 2), ISO 13849-1: 2006 (Category 2, PLc), IEC 61508-1 to 7 (SIL1)
<Japanese Industrial Standards (JIS)>
JIS B 9704-1/2 (Type 2), JIS B 9705-1 (Category 2), JIS C 0508 (SIL1)
<Standards in US / Canada>
ANSI/UL 61496-1/2 (Type 2), ANSI/UL 508, UL 1998 (Class 1)
CAN/CSA C22.2 No.14, CAN/CSA C22.2 No.0.8
<Regulations in US>
OSHA 1910.212 (Note), OSHA 1910.217(C) (Note), ANSI B11.1 to B11.19, ANSI/RIA 15.06
Regarding EU Machinery Directive, a Notified Body, TÜV SÜD, has certified with the type
examination certificate.
With regard to the standards in US / Canada, a NRTL, UL (Underwriters Laboratories Inc.)
has certified for
C
UL
US
Listing Mark.
Note: In case of using the bottom cap cable (
SF2B-CB05-A
) (optional), this device does not conform to OSHA.
<Reference>
The conformity to JIS, OSHA and ANSI for this device has been evaluated by ourselves.
The
C
UL
US
Listing Mark
indicates compliance with both Canadian and US requirements.
This device conforms to the EMC Directive and the Machinery Directive. The
mark on the main
body indicates that this device conforms to the EMC Directive.
1-4 Confirmation of Packed Contents
Sensor: EMITTER, RECEIVER
each 1pc.
Test Rod
1 pc.
For
SF2B-H
□SL
:
SF2B-TR27
(ø 27 x 220mm)
Intermediate Supporting Bracket (
MS-SF2B-2
)
0 to 3 sets
Note: The intermediate support bracket (
MS-SF2B-2
) is enclosed with the following devices. The quantity
differs depending on the device as shown below:
1 set :
SF2B-H
□
SL
…40 to 56 beam channels,
SF2B-A
□
SL
…20 to 28 beam channels
2 sets :
SF2B-H
□
SL
…64 to 80 beam channels,
SF2B-A
□
SL
…32 to 40 beam channels
3 sets :
SF2B-H
□
SL
…88 to 96 beam channels,
SF2B-A
□
SL
…44 to 48 beam channels
Instruction Manual (this manual)
1 pc.
•
In Japan, never use this device as a safety equipment for any press machine or
shearing machine.
•
When this device is used in a place other than the places shown in the table
above, be sure to confirm the standards or regulations applicable in each region
or country before use.
