![background image](http://html.mh-extra.com/html/panasonic/sf2b-series/sf2b-series_quick-instruction-manual_277146037.webp)
37
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
English
WARNING
♦
Maintenance
•
When replacement parts are required, always use only genuine supplied replace-
ment parts. If substitute parts from another manufacturer are used, the device may
not come to detect, result in death or serious injury.
•
The periodical inspection of this device must be performed by an engineer having the
special knowledge.
•
After maintenance or adjustment, and before starting operation, test this device fol-
lowing the procedure specified in “
10. Maintenance
.”
•
Clean this device with a clean cloth. Do not use any volatile chemicals.
♦
Others
• Never modify this device. Modification may cause the device not to detect, resulting
in death or serious injury.
• Do not use this device to detect objects flying over the sensing area.
•
Do not use this device to detect transparent objects, translucent objects or objects
smaller than the specified minimum sensing objects.
2. Confirmation of Packed Contents
□
Sensor: Emitter, Receiver
1 pc. each
□
Test rod
1 pc
SF2B-H
□:
SF2B-TR27
(ø27 × 220mm)
□
Intermediate Supporting Bracket
MS-SF2B-2
0 to 3 sets
Note: The intermediate support bracket
MS-SF2B-2
is enclosed with the following devices. The quantity differs
depending on the device as shown below:
Set
Model No.
1 set
SF2B-H
□
: 40 to 56 beam channels,
SF2B-A
□
: 20 to 28 beam channels
2 sets
SF2B-H
□
: 64 to 80 beam channels,
SF2B-A
□
: 32 to 40 beam channels
3 sets
SF2B-H
□
: 88 to 96 beam channels,
SF2B-A
□
: 44 to 48 beam channels
□
Quick Instruction Manual
1 pc.
Summary of Contents for SF2B Series
Page 99: ... MEMO ...
Page 100: ......