39
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
English
4. Device Placement
● This is the configuration when two or more sets of emitter and receiver facing each other
are placed without series or parallel connection between them. It is used for the case that
there is a problem in wiring or for system evaluation in case of addition of equipment.
●
It is used for system evaluation in case of addition of equipment.
WARNING
●
Refer to the examples of device placement given below and understand them thorough-
ly before installing the devices. Improper sensor placement could cause device malfunc-
tion, which can result in death or serious injury.
●
If this device is used in multiple sets, arrange them to avoid mutual interference. If mu-
tual interference occurs, it can result in death or serious injury.
<Example of device placement>
1) Install the emitter and the receiver back to
back
2) Arrange the emitter and the receiver vertically
on opposite sides.
3) Arrange the emitter and the receiver
horizontally on opposite sides.
4) Install a barrier
The above figures are just examples of device placement. If there are any questions or problems,
please contact our office.
WARNING
Position the emitter and receiver
so that their cables are aligned.
Failure to do so will cause the
system to malfunction.
Cabel
Cabel
Cabel
Cabel
<Reference>
Receiver
Emitter
Emitter
Receiver
Barrier
Receiver
Emitter
Emitter
Receiver
Receiver
Emitter
Emitter
Receiver
Receiver
Emitter
Emitter
Receiver
Summary of Contents for SF2B Series
Page 99: ... MEMO ...
Page 100: ......