Panasonic SD-P2000, Operating Instructions Manual

Page: 119 / 124

EN59
Abnormal shape of br
ead
T
roubleshooting
Tips
When the following
conditions happen
Causes Solutions
Key operation is
disabled
ɑ Power plug is not plug in. Plug in the power plug.
Instant dry yeast
is not dispensed.
ɑ
Timing for automatically adding instant dry yeast depends on the room temperature
and menu you have selected.
ɑ Yeast dispenser is damp or has static electricity. Wipe with a wrung cloth and air dry.
ɑ
Is the instant dry yeast dampened?
Use new instant dry yeast.
Raisins and nuts
cannot be added.
ɑ Are the ingredients piled up?
Spread the ingredients flat.
(P. EN18)
Operation stops
midway ɑ
Operation will be stopped if power fails for
more than 10 min.
The dough can be used again if
the operation stops in a dough
state. (P. EN55)
Sounds are heard
during operation
and timing
The following sounds are normal.
ɑ
When dough kneading and air discharge are going on,
t
the sounds of kneading are heard.
t
the sounds of motor running are heard.
ɑ
When instant dry yeast and the ingredients of the raisin and nut dispenser are added
into the bread pan.
t
the sounds of opening the flap valve and the dispenser flap are heard.
Stops halfway
(Blade does not work)
ɑ Since too many ingredients were added or the blade is stuck on the hard ingredients,
the motor is overloaded and the protective function is hence activated, which may
cause operation to stop immediately.
(Powder still remains upon completion and baking does not happen)
＊ Please consult Panasonic customer service centre.
Abnormal sounds
on the blade
ɑ There is a clearance between the blade and the shaft.
(The front end moves by 3 cm or so)
Powders still
remain and
baking does not
occur ɑ Have you forgotten to install the blade? Install the blade. (P. EN16)
ɑ Is the blade shaft excessively fastened in the
bread pan so that it can’t move?
Please replace the main shaft
bearing if the blade shaft does not
rotate.
Please consult your Panasonic
customer service centre
Dough is leaking
out at the
bottom of the
bread pan
ɑ A small amount of dough leaks
out from the discharge port of
the bread pan during operations.
To avoid affecting the
rotations, the dough that
enters the rotational part
will be discharged.
This is normal. Please confirm
if the blade is rotating.
The bottom of
the bread pan
turns black
ɑ The bottom of the bread pan may turn black due to friction when kneading.
In that case, please wipe and clean with a damp kitchen towel.
ɑ Smoke or odors may occur upon initial use. However, they will disappear some time after use. Operations are not affected.
Discharge port
(4 positions)
Shaft
Troubleshooting
Please confirm the following issues first.
If any anomaly is still identified, please
contact Panasonic customer service
centre immediately.
( )
At the bottom of the
bread pan
( )
( )