5
RQ
T0
B
31
Transporting the unit
Preparation
Disconnect all connected devices and cables from the
unit.
Note:
•
More than one person is required to move, tilt or carry the
unit.
•
Keep the unit at least 10 mm (
13
/
32
″
) away from other objects
for proper ventilation.
•
Put the unit on a flat surface.
•
The speakers do not have magnetic shielding. Do not put
them near PCs or other equipment that can be magnetized.
•
The audio output is
multidirectional. Do not
obstruct the speakers with
any object that may decrease
the sound quality.
•
The subwoofer is located at
the front and rear of the unit.
Keep the rear of the unit at
least 10 cm (4
″
) away from a
wall for better sound quality.
•
When you play at a high
volume for long time, it can
cause damage to the
speakers.
•
Lower the volume in these conditions to prevent damage:
–
When the sound is distorted.
–
When you adjust the sound quality.
Making the connections
Connect the AC power supply cord only after all the
other connections have been made.
1
Connect the FM indoor antenna.
Put the antenna where there is the best reception.
2
Connect the AC power supply cord.
Do not use any other AC power supply cords except
the supplied one.
Conserving power
The system consumes a small amount of power even
when it is in standby mode. Disconnect the power
cord if you do not use the system.
Some settings will be lost after you disconnect the
system. You have to reset them.
CAUTION!
•
Improper handling or transportation manner may
cause the unit to fall, etc., resulting in damage
and/or personal injury.
•
Do not transport the unit by holding the lighting
plate as this may damage the lighting plate.
•
Do not put any object on the top panel of the unit.
•
Do not stack any object on the unit.
•
Do not allow children to climb on the unit.
•
Be careful when babies or children are near.
Lighting plate
Adhesive tape
(not supplied)
To household
AC outlet
ENGLISH
SC-UA7 PC RQT0B31-C En.fm Page 5 Thursday, June 9, 2016 9:45 AM