11
RQ
T0
B
31
Memory presetting
You can preset up to 30 FM stations.
█
Automatic presetting
1
Press [AUTO PRESET] to select “LOWEST” or
“CURRENT”.
2
Press [OK] to start presetting.
The tuner presets all the stations it can receive into
the channels in ascending order.
To cancel, press [
8
].
█
Manual presetting
1
Press [
3
] or [
5
] (unit: [
2
/
3
] or
[
5
/
6
]) to tune in to the station.
2
Press [OK].
3
Press the numeric buttons to select a preset
number.
Re-do steps 1 through 3 to preset more stations.
The new station replaces any station that occupies
the same preset number.
█
Selecting a preset station
Press the numeric buttons, [
2
] or [
6
] to select
the preset station.
Using the unit
1
Touch [
8
] to select “PRESET”.
2
Touch [
2
/
3
] or [
5
/
6
] to select the preset
station.
Improving the sound quality
1
Press [PLAY MENU] to select “FM MODE”.
2
Press [
Y
,
U
] to select “MONO” and then press
[OK].
To cancel, select “STEREO”.
“MONO” is also canceled when you change the
frequency.
To memorize the setting
Continue with step two of “Manual presetting”.
Checking the signal status
Press [DISPLAY].
FM allocation setting
This system can also receive FM broadcasts allocated in
0.1 MHz steps.
1
Press [RADIO/EXT-IN] to select “FM”.
2
Touch and hold [SELECT] on the unit.
After a few seconds, the display panel shows the current
minimum radio frequency. Release the button when the
minimum frequency changes.
• To go back to the initial setting, re-do the above steps.
• Preset frequencies are erased after you change the
setting.
Sound effects
1
Press [EQ] to select the sound effect.
2
Press [
Y
,
U
] (unit: [<, >]) to select the setting and
then press [OK].
D.Bass
1
Press [D.BASS] to select “D.BASS LEVEL” or
“D.BASS BEAT”.
To cancel, select “OFF D.BASS”.
2
Press [
Y
,
U
] (unit: [<, >]) to select the setting and
then press [OK].
Note:
D.BASS BEAT: This function emphasizes the attack level of
the drumbeat and produces a punchy sound. Depending on
the track, the effect may be small.
Illumination
You can turn on or turn off the illumination on the system.
Press [ILLUMINATION] to select “ON” and then press
[OK].
To cancel, select “OFF”.
LOWEST
Tuning begins from the lowest frequency.
CURRENT Tuning begins at the current frequency.
FM – – – –
The FM signal is weak.
The system is not tuned in to a station.
FM ST
The FM signal is in stereo.
FM MONO
“MONO” is selected as the “FM MODE”.
The FM signal is in monaural.
PRESET EQ
Select the desired preset EQ
setting.
Note:
Select “VOICE EX” for voices to be
heard as if they are coming from a
TV. (The unit and the TV must be put
side by side.)
BASS/MID/TREBLE
–4 to +4
SURROUND
“ON SURROUND” or
“OFF SURROUND”
ENGLISH
SC-UA7 PC RQT0B31-C En.fm Page 11 Thursday, June 9, 2016 9:45 AM