Confidential
Until:
24 Jun 2019
5
T
Q
BJ
218
9
Making the connections
Connect the AC power supply cord only after all the
other connections have been made.
1
Connect the FM indoor antenna.
Put the antenna where reception is best.
2
Connect the AC power supply cord.
Do not use any other AC power supply cords except
the supplied one.
Hold the unit when connecting or disconnecting the
AC power supply cord to prevent the unit from falling.
Conserving power
The system consumes a small amount of power even
when it is in standby mode. Disconnect the power
supply if you do not use the system.
Some settings will be lost after you disconnect the
system. You have to set them again.
Note:
Keep the antennas away from the AC power supply cord to
avoid picking up noise.
Preparing the remote control
Use alkaline or manganese battery.
Install the battery so that the poles (+ and –) align with those in
the remote control.
Adhesive tape
(not supplied)
If the power plug does not fit your socket, use the
supplied power plug adapter.
To household AC outlet
SC-TMAX40.50PU_TQBJ2189 En.fm Page 5 Wednesday, June 12, 2019 3:29 PM
offset printing
