10.3.3. Error Code Table
Self-Diagnosis Function (refer Section 10.3) provides information on any problems occuring for the unit and its respective
components by displaying the error codes. These error code such as U**, H** and F** are stored in memory and held unless it is
cleared.
The error code is automatically display after entering into self-diagnostic mode.
Error Code
Diagnosis Contents Description of error
Automatic FL Display
Remarks
H01
Mode SW, plunger
and capstan motor
abnormal
The tray is not able to
open.
For deck mechanism unit (For deck 1/2).
Press [
] on main unit for
next error.
H02
Rec INH SW
abnormal
(Spindle
servo,
DSC
(IC8251) Spindle motor,
CLV servo error)
For deck mechanism unit (For deck 2).
Press [
] on main unit for
next error.
H03
HALF SW abnormal
(Traverse
motor,
IC8251)
For deck mechanism unit (For deck 1/2).
Press [
] on main unit for
next error.
F15
RESET SW
abnormal
REST SW: ON is not
detected
within
the
specified time.
For DVD unit (For Traverse).
Press [
] on main unit for
next error.
F26
Transmission error
between CD Servo
LSI IC and
microprocessor IC
When set to CD mode,
the sense signal does
not turn “Low”, a fail safe
time
after
system
command
transmission
is sent.
For DVD unit (For Traverse).
Press [
] on main unit for
next error.
37
SA-VK950GC / SA-VK950GS / SA-VK950GCS / SA-VK950GCT
36
manual de servicio SC-TM910DVD