Item
FL Display
Key Operation
Mode Name
Description
Remote Control Key
Initial setting of
laser drive current
Initial setting of laser drive current.
Initial current value for each of
DVD laser and CD laser is
separately saved in the EEPROM
IC.
1.
For DVD/CD drive current mode
2.
The measurement value (In decimal
notation)
The value denotes the current in decimal
notation. The above example shows the
initial current 20mA and 23mA for DVD
laser and CD laser respectively when the
laser is switched on.
In STOP (no disc) mode, press STOP
button on the player, and PAUSE button on
the remote control unit.
Cancelled automatically 5 seconds later.
Press “FL Display”
button on remote
control unit for next page (FL Display) on
values of laser drive current.
ECC error display ECC decode error display.
In STOP (no disc) mode, press STOP
button on the player, and TOP MENU
button on the remote control unit.
Cancelled automatically 5 seconds later.
Press “FL Display”
button on remote
control unit for next page (FL Display) on
values of laser drive current.
Time 1 check
Timer 1 check.
Laser operation time is measured
separately for DVD laser and CD
laser.
Press “FL Display” button for next
page of FL Display (to show CD
laser time).
Shown to the left is DVD laser time, and to
the right CD laser time.
Time is shown in 4 digits of decimal notation
in a unit of 10 hours.
“0000” will follow “9999”.
In STOP (no disc) mode, press STOP
button on the player, and “
” button on
the remote control unit.
Cancelled automatically 5 seconds later.
Timer 1 reset
Timer 1 reset.
Laser operation time of both DVD
laser and CD laser is reset all at
once.
T1_0000/0000 (display1/display2)
Shown to the left is DVD laser time, and to
the right CD laser time.
Time is shown in 4 digits of decimal notation
in a unit of 10 hours.
While display Timer 1 data, press STOP
button on the player, and “
“ button on
the remote control unit.
Cancelled automatically 5 seconds later.
Timer 2 check
Timer 2 check.
Spindle motor operation timer.
Press “FL Display” button for next
page of FL Display.
Time is shown in 5 digits of decimal notation
in a unit of 10 hours.
“0000” will follow “9999”.
In STOP (no disc) mode, press STOP
button on the player, and “
“ button on
the remote control unit.
Cancelled automatically 5 seconds later.
Timer 2 reset
Timer 2 reset.
Spindle motor operation timer.
Time is shown in 5 digits of decimal notation
in a unit of 10 hours.
While display Timer 2 data, press STOP
button on the player, and “
“ button on
the remote control unit.
Cancelled automatically 5 seconds later.
28
SA-VK950GC / SA-VK950GS / SA-VK950GCS / SA-VK950GCT
27
manual de servicio SC-TM910DVD